Product Details

ME-280/HV-140

Used for molding of resin insulators.

Product Category	by Use	by Function
Product Category	Resin for High Voltage Devices	by Use	High Voltage Devices Resin Insulators	by Function	Weatherability Flame Resistant (UL-94 V-0) High Tg

Two-component heat-curing epoxy resin
Acid anhydride curing agent
Better weather resistance than general-purpose epoxy resins
Good water repellency
UL 94 V-0 certified grade
Guaranteed UL 746A comparative tracking, dielectric breakdown strength, and volume resistivity

ME-280 : 20kg
HV-140 : 20kg

The ingredients may separate or the filler may settle. Stir well before use.
Calculate the required main and hardening agents based on the mixing ratios listed in the product information.
Measure the main agent and hardener into a polyethylene cup.
Mix the main agent and hardener well. Use a stirrer or spatula for mixing.
When stirring, make sure to agitate the corners and bottom of the cup.
Defoam the mixed liquid immediately after stirring. Insufficient defoaming may cause air bubbles.
Pour or apply the mixture.
Curing should be done under the specified curing conditions.
Do not cure a large amount at a time. Failure to do so may result in smoking or ignition.