Product Details

NM-300A/NM-300B

Resins for CFRP lamination. Suitable for infusion process. Good adhesion to carbon cloth.

Product Category	by Use	by Function
Product Category	Epoxy Resin for Prototype Model	by Use	Prototype Models	by Function	Heat Resistant

NM-300A : 17kg
NM-300B : 17kg

The ingredients may separate or the filler may settle. Stir well before use.
データを入手中です。数秒間待ってから、切り取りまたはコピーをもう一度お試しください。
Measure the main agent and hardener into a polyethylene cup.
Mix the main agent and hardener well. Use a stirrer or spatula for mixing.
When stirring, make sure to agitate the corners and bottom of the cup.
Defoam the mixed liquid immediately after stirring. Insufficient defoaming may cause air bubbles.
Pour or apply the mixture.
Curing should be done under the specified curing conditions.
Do not cure a large amount at a time. Failure to do so may result in smoking or ignition.