Product Details

NM-350A/NM-350B

Resins for CFRP lamination. Suitable for hand lay-up process. Good adhesion to carbon cloth.

Product Category	by Use	by Function
Product Category	Epoxy Resin for Prototype Model	by Use	Prototype Models	by Function	Heat Resistant Long Potlife

NM-350A : 17kg
NM-350B : 17kg

The ingredients may separate or the filler may settle. Stir well before use.
Calculate the required main and hardening agents based on the mixing ratios listed in the product information.
Measure the main agent and hardener into a polyethylene cup.
Mix the main agent and hardener well. Use a stirrer or spatula for mixing.
When stirring, make sure to agitate the corners and bottom of the cup.
Defoam the mixed liquid immediately after stirring. Insufficient defoaming may cause air bubbles.
Pour or apply the mixture.
Curing should be done under the specified curing conditions.
Do not cure a large amount at a time. Failure to do so may result in smoking or ignition.