Product Details

AD-45V/HQ-1W

Room temperature curing and fast curing type resin.

Product Category by Use by Function
Product Category
  • Adhesive for Fluoro-Rubber
by Use
  • Adhesive for Fluoro-Rubber
by Function
  • Low Temperature Curing
  • High Adhesive Strength

Specification

    Features

  • Two-component epoxy resin
  • Room temperature curing type
  • Polyamide curing agent
  • Imparts thixotropic properties
  • Good adhesion to fluoro-rubber.

    by Use

  • Adhesive for fluoro-rubber
  • Adhesion of non-heatable parts

Types of packaging

AD-45V : 0.6kg
HQ-1 : 0.4kg

Instructions for Use

  1. The ingredients may separate or the filler may settle. Stir well before use.
  2. Calculate the required main and hardening agents based on the mixing ratios listed in the product information.
  3. Measure the main agent and hardener into a polyethylene cup.
  4. Mix the main agent and hardener well. Use a stirrer or spatula for mixing.
  5. When stirring, make sure to agitate the corners and bottom of the cup.
  6. Defoam the mixed liquid immediately after stirring. Insufficient defoaming may cause air bubbles.
  7. Pour or apply the mixture.
  8. Curing should be done under the specified curing conditions.
  9. Do not cure a large amount at a time. Failure to do so may result in smoking or ignition.