Flexible resin that can be used for sensors and relays.
| Product Category | by Use | by Function | |||
|---|---|---|---|---|---|
| Product Category |
|
by Use |
|
by Function |
|
Product Details
CE-30/XY-1933
Specification
- Polyetheramine curing agents
- Flexible type, excellent in stress relaxation
- Good adhesion and bonding properties
Features
- Various sensors, relays, thermal fuses
by Use
Types of packaging
CE-30 : 1kg, 5kg
XY-1933 : 1kg, 4kg
Instructions for Use
- The ingredients may separate or the filler may settle. Stir well before use.
- Calculate the required main and hardening agents based on the mixing ratios listed in the product information.
- Measure the main agent and hardener into a polyethylene cup.
- Mix the main agent and hardener well. Use a stirrer or spatula for mixing.
- When stirring, make sure to agitate the corners and bottom of the cup.
- Defoam the mixed liquid immediately after stirring. Insufficient defoaming may cause air bubbles.
- Pour or apply the mixture.
- Curing should be done under the specified curing conditions.
- Do not cure a large amount at a time. Failure to do so may result in smoking or ignition.
