Product Details


Room temperature curing and fast curing type resin.

Product Category by Use by Function
Product Category
  • Resin for Car Electro Devices & Sensors 
by Use
  • General Modules
by Function
  • Low Stress
  • Low Temperature Curing
  • Fast Curing
  • Impact Resistant
  • Stress Release



  • Two-component epoxy resin
  • Room temperature curing type
  • Mercaptic curing agent
  • Low viscosity
  • Fast curing

    by Use

  • Adhesion of non-heatable parts
  • For speakers

Types of packaging


Instructions for Use

  1. The ingredients may separate or the filler may settle. Stir well before use.
  2. Calculate the required main and hardening agents based on the mixing ratios listed in the product information.
  3. Measure the main agent and hardener into a polyethylene cup.
  4. Mix the main agent and hardener well. Use a stirrer or spatula for mixing.
  5. When stirring, make sure to agitate the corners and bottom of the cup.
  6. Defoam the mixed liquid immediately after stirring. Insufficient defoaming may cause air bubbles.
  7. Pour or apply the mixture.
  8. Curing should be done under the specified curing conditions.
  9. Do not cure a large amount at a time. Failure to do so may result in smoking or ignition.